Load cells,Force sensors,Torque transducers
Load cells,Force sensors,Torque transducers
 |
| Place of Origin: | China |
| Brand Name: | Forsentek |
| Certification: | CE |
| Model Number: | FL25 |
| Minimum Order Quantity: | 1pc |
|---|---|
| Packaging Details: | Shockproof carton |
| Delivery Time: | 3-20 working days |
| Payment Terms: | T/T, Western Union, MoneyGram,Paypal |
| Supply Ability: | 2000pcs/month |
| Material: | Stainless Steel | Capacity: | 50N 100N 200N 500N 600N 1KN |
|---|---|---|---|
| Output: | Analog Output | Principle: | Strain Gauge Force Transducer |
| Load Direction: | Tension And Compression | Connection: | M5/M3 Threaded Rod |
Features
Dimensions(unit in "mm")
Specifications
| Rated capacity | 50N 100N 200N 500N 600N 1KN |
| Rated output | 2.0mV/V |
| Excitation | 5-12V |
| Zero balance | ±2% of R.O. |
| Non-linearity | ±0.5% of R.O. |
| Hysteresis | ±0.5% of R.O. |
| Non-repeatability | ±0.2% of R.O. |
| Creep(10min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift on zero | ±0.02% R.O./oC |
| Temp. shift on span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 750±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded |
| Wiring code |
Compression@ Red--Excitation+ Black--Excitation- |
A force transducer is a eletronic component that converts load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
Rod end force transducer FL25 is able to measure force in both tension and compression direction,outputs millivolt signal ranging -20~20mV, and signal amplification may be required for most applications, a load cell amplifier can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.
The applied force can be displayed through a digital indicator,force indicator FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Multi axis load cell 1kg 2kg 5kg 10kg 3-axis force measurement transducer
Triaxial force sensor 1kN 500N 300N 200N 100N 3-axis load cell
3 axis load cell 200kN 100kN 50kN 20kN 10kN 5kN 2kN 1kN Triaxial force sensor
Triaxial load cell 1000kg 500kg 200kg 100kg Triaxial force sensor
Miniature rotary torque sensor 1NM 2NM 3NM 5NM rotating torque measurement
Rotary torque sensor 10NM 20NM 50NM 100NM 200NM 300NM 500NM torque transducer
Contactless rotating type torque speed sensor measuring motor torque
Micro force sensor 50N 100N 200N 500N Micro loadcell sensor
10KG miniature load cell sensor 5kg small size weight transducer 2kg
Miniature force transducer 0-1000N miniature force sensor 0-220 lbs
Miniature force transducer 50N 100N 200N 500N 1kN 2kN force measurement
